High quality, 3ft (92cm) High Deluxe Fruit Cages ideal for protecting low crops such as strawberries.
A tubular aluminium framework (which won't rust or rot) with a dark green, powder coated finish producing a very smart, painted look which is not only extremely durable but also greatly enhances the overall appearance. Black U/V stabilised nylon joints are used to connect the framework, producing a Fruit Cage that will last for years.
Kits based on 6ft (183cm) spans (i.e. an upright at every 6ft (183cm) within the fruit cage) which gives an extremely stable structure.
Each kit is supplied with everything you'll need to complete the fruit cage, as follows:
3'6" (99cm) corner legs - rot proof ?" (19mm) diameter aluminium tubing which has a strong 1mm thick wall and a dark green, powder coated finish, supplied 3'6" (99cm) long allowing 6" (15cm) to be sunk into the ground to provide firm anchorage. Each has a black ground spike at one end and a 3-way 90-degree joint at the top to form the corner of the cage.
6ft (183cm) horizontals - the same specification as the uprights, used to form the horizontals at the top of the cage. These should be connected to the joints at the top of the uprights using either a wooden or rubber mallet.
Fruit cage netting - ?" (2cm) square mesh 2 metres wide, used to cover the sides and top of the fruit cage.
Netting clips - to join the fruit cage netting to itself.
Ground pegs - to anchor the bottom edge of the netting to the ground.
The cages are very strong but light enough to be moved from one site to another - increasing their usefulness throughout the year.In snowy weather fruit cage netting should either be removed or replaced by larger span pigeon netting to allow snow to fall through - wet snow is very heavy. |
