Top quality 1.8KW and 2.8KW Hotbox Electric Fan Heaters with very sturdy long-lasting stainless steel cases and incorporating a sheathed heating element to enable safe use in greenhouse environments.
Controlled by a traditional capillary thermostat (range 6*-38*C /42*-102*F).
A powerful internal fan uses only 70 watts of power to circulate 400 cubic metres of air per hour.
Fans run continuously whilst the heating element switches on and off as the temperature requires.
For air circulation to aid cooling in the summer the fan can be run on its' own continuously.
Complete with a 6'6" (198cm) mains cable and plug for simple installation.
Models available: 1.8KW to heat up to 8' x 10' greenhouses, 2.8KW to heat up to 10' x 12' greenhouses.
Dimensions: 1.8KW - 10" (25cm) long x 8?" (22cm) dia., 2.8KW - 16" (41cm) long x 8?" (22cm) dia.
Designed to be suspended securely from the ridge of the greenhouse (zinc plated chains supplied). The 2.8KW model is supplied with additional foot mounts and handle to allow the heater to be floor mounted.
An electronic fan heater is easy to install and operate. Its' internal fan provides good air movement, spreading the heat evenly around the whole greenhouse. For maximum benefit from the fan mount the heater where air can freely circulate around the whole of the heater. Circulating the air within the greenhouse with or without heat will help to prevent damping off and disease. |
