Greenhouse Fixings, Spare Parts and Accessories
|
A wide selection of things for repairing, supporting and fixing all manner of things in the greenhouse.
|
|
Band Clips are stainless steel sprung clips designed to securely hold glass or other types of greenhouse glazing in most aluminium greenhouse frameworks.
more information |
|
A pack of easy to fit Bolts and Rings designed to give a strong tying point within aluminium greenhouses.
more information |
|
An extraordinarily strong adhesive fixes these Fixalls to just about any surface giving a strong fixing point to which anything can be tied - ideal for climbing plants, fixing mesh etc.
more information |
|
These all aluminium Fixing Supports have been designed as a useful extra for the greenhouse, to provide very strong tying and hanging points in the greenhouse where you need them.
more information |
|
A good quality Spanner with a 10mm open and ring end for tightening up nuts and bolts.
more information |
|
'W' shaped stainless steel wire clips used to securely hold glass in aluminium greenhouse frameworks.
more information |
|
When glazing or re-glazing a glass glazed greenhouses use these sturdy, rust proof aluminium part Formed Z Clips where two panes of glass overlap.
more information |
|
Robust, stainless steel Pre Formed Z Clips used when glazing or re-glazing a glass glazed greenhouses to hold two overlapping panes of glass.
more information |
|
Packs of aluminium Cropped Head Bolts and Nuts used to provide a means of fixing within an aluminium greenhouse without dismantling your greenhouse.
more information |
|
Robust, white Greenhouse Door Wheels suitable for most makes of greenhouse.
more information |
|
Suitable for use in most makes of aluminium greenhouses this high density foam Glazing Strip is used to form a cushion between the greenhouse framework and glass.
more information |
|
Strong, aluminium 3/8" (1cm) long Round Headed Bolts and Nuts with a slotted head to take a screwdriver.
more information |
|
Strong S Hooks used to provide a secure hanging point for baskets etc.
more information |
|
Strong, aluminium 3/8" (1cm) long Square Headed Bolts and Nuts as used to assemble most makes of aluminium greenhouse.
more information |
|
Sturdy, easy to fit Vine Supports designed to enable you to create a strong fixing/tying point away from the side or roof of a greenhouse.
more information |
|
Specifically designed for the Eden models but can be used on most other greenhouses the "C" shaped Acorn type glazing bead is a popular section designed to go over a raised 'pip' on the glazing bar. We would be pleased to supply samples before you make your purchase as a good fit is essential.
more information |
|
Long support brackets to create tying points away from the sides and roof of the greenhouse, brackets come complete with cropped bolt and nut.
more information |
|
W shaped steel wire clips to hold glass in aluminium greenhouse frames.
more information |
|
Two nylon greenhouse door wheels with steel bearings and two aluminium bolts & nuts the wheels are 28mm diameter and will fit a 32mm slot - suitable for most greenhouse sliding doors - the greenhouse door can be re drilled and the wheels re positioned if existing wheels are of a different size.
more information |
|
The small fixing support provides a useful bracket that can be used as a tying point for growing vines up, supplied complete with cropped bolts.
more information |
|
'S' Hooks are ideal to use with small fixing supports (GRE-420) to hold your hanging baskets.
more information |
More from Greenhouses (Glasshouses)
green, house, greenhouse, glass, glasshouse, accessory
|
