Allotment Growing Shop

A sturdy Plant House Spare Cover manufactured from U/V stabilised polythene shaped to fit easily over the frame of the Plant House with minimum effort.

Spare Cover For Plant House (SC800C) from TwoWests & Elliott

A sturdy Plant House Spare Cover manufactured from U/V stabilised polythene shaped to fit easily over the frame of the Plant House with minimum effort.

Reinforced with green nylon.

Reinforced eyelets around the base of the cover enable easy anchorage using ground pegs (supplied with the Plant House).

2' (61cm) wide x 5'10" (178cm) high zipped doorway that can be unzipped from inside or out.

18" (46cm) x 18" (46cm) window in the rear fitted with fine insect netting and a Velcro fastening cover.

Low level ventilation flaps with insect net at both sides, with Velcro fastening covers.

Dimensions: 5'6" (168cm) wide x 3'11" (119cm) long, 6'7" (201cm) high to the ridge, 5'1" (155cm) high to the eaves.

Please note: suitable for use with the Plant House ONLY.

Illustration shows the Plant House complete with Cover.