When designing an automatic plant watering system operating from a water butt use a 7mm T Connector to 'branch' the 7mm pipe.

Water Butt Drip Kit 7mm Tee Connector from TwoWests & Elliott

When designing an automatic plant watering system operating from a water butt use a 7mm T Connector to 'branch' the 7mm pipe.

Manufactured from robust brown plastic.

Barbs on the connector help to create a secure fitting between the tube and connector.

Dimensions: approximately 3/4" (20mm) long in all three directions.

We supply all the components necessary for you to design your own Water Butt Drip System to meet your exact requirements.

To successfully operate a Water Butt Drip System the water butt should be a minimum of 12" (31cm) above the plants to be watered.

Please note: when using the 7mm pipe you can run up to a total of 100m, providing this length is divided into separate runs of no more than 30 metres.