When designing a 1/4" Drip Watering System use this 1/4" T Connector to 'branch' the tube.

1/4" T Connector (3516) from TwoWests & Elliott

When designing a 1/4" Drip Watering System use this 1/4" T Connector to 'branch' the tube.

Manufactured from robust black plastic.

Barbs on the connector help to create a secure fitting between the tube and connector.

Dimensions: approximately 1" (2.5cm) long in all three directions.

We supply all the components necessary for you to design your own Drip Watering System to meet your exact requirements.

For successful operation of a Drip Watering System the water supply should be at a low and even pressure - using an overhead tank or a 2 Gallon Bag is a suitable source.