These Gardena Micro End Strip Spray Nozzles are suitable for watering long, narrow beds and borders or troughs.

M7 - End Spray Nozzle Strip Pack of 5 (Gardena 1372-20) from TwoWests & Elliott

These Gardena Micro End Strip Spray Nozzles are suitable for watering long, narrow beds and borders or troughs.

The flow rate of the Nozzles is set at 45 litres per hour.

Provides a fine mist over long narrow areas in one direction up to approx. 9' (2.75m) by 2' (0.6m).

To control the size of the area covered insert a Control Valve (available to purchase separately) into which the Mist Nozzle can be screwed.

Can be used by either:

Inserting directly into the wall of 1/2" (13mm) Supply Tube.

Fitting onto a 1/2" (13mm) Joint or Tube and Nozzle Peg.

Or to lift the Nozzle higher use on top of a 9" (23cm) Pipe Extension (all these items are available to purchase separately).

Gardena product code: 1372-20.

Supplied as a pack of 5.

The easiest way to fit these nozzles is to use an Installation Tool (available to purchase separately). Use this tool to both make the hole in the wall of the Supply Tube ready to accept the nozzle and to hold the head of the nozzle and 'screw' it into place - whether into Supply Tube, through a Joint or Tube and Nozzle Peg or onto an Extension Pipe.