These Gardena 180 degree Spray Nozzles are ideal for use in flower beds, borders or vegetable plots - by using in conjunction with 90? and 360? Spray Nozzles you can ensure complete coverage of a given area.

M3 - Spray Nozzle 180 Deg Pack of 5 (Gardena 1367-20) from TwoWests & Elliott

These Gardena 180 degree Spray Nozzles are ideal for use in flower beds, borders or vegetable plots - by using in conjunction with 90 degree and 360 degree Spray Nozzles you can ensure complete coverage of a given area.

The flow rate of the Nozzles is set at 95 litres per hour.

Provides a light spray over a 180? area between approx. 6'6" (2m) up to 9'10" (3m).

To control the length of the area covered insert a Control Valve (available to purchase separately) into which the Spray Nozzle can be screwed.

Can be used by either:

Inserting directly into the wall of 1/2" (13mm) Supply Tube.

Fitting onto a 1/2" (13mm) Joint or Tube and Nozzle Peg.

Or to lift the Sprinkler higher use on top of a 9" (23cm) Pipe Extension (all these items are available to purchase separately).

Gardena product code: 1367-20.

Supplied as a pack of 5.

The easiest way to fit these nozzles is to use an Installation Tool (available to purchase separately). Use this tool to both make the hole in the wall of the Supply Tube ready to accept the nozzle and to hold the head of the nozzle and 'screw' it into place - whether into Supply Tube, through a Joint or Tube and Nozzle Peg or onto an Extension Pipe.