Reliable, constant watering can be achieved on benches or shelves by installing an Automatic Water Reservoir.

Automatic Water Reservoir from TwoWests & Elliott

Reliable, constant watering can be achieved on benches or shelves by installing an Automatic Water Reservoir.

Contents:

A Plastic Tank - 4 3/4" (12cm) x 6 1/2" (16.5cm) x 5" (13cm) deep, 1.4 Litre (2 1/2 pt) capacity.

Torbeck Control Value - to enable automatic filling. Starts and stops the water flow maintaining a constant level of water in the reservoir.

Fittings - to allow connection to a 1/2" hose (use for mains or water butt supply) or to 1/4" tube (use for Overhead Tanks or Bags).

Anti Tip Brackets - complete with cropped bolts and nuts.

Aluminium Lid - to reduce evaporation and prevent algae growth.

Capillary Wick - to draw water from the reservoir onto capillary matting.Water can be supplied to the reservoir from the mains, a water butt, an overhead tank or 2 gallon bag.

When using a reservoir to supply water to matting on a staging more than 10ft (305cm) long, mount in a central position.

The water supply should not be above the area to be watered otherwise flooding will occur - ideally it should be level or no more than 4" (10cm) below the watering area.